![]() |
Tips of the HST’s and intersecting seams of the rows of the NCD block. |
Step 1: Place pieces Right Sides together, looking down on the raw edges of the pieces, match the corresponding seams.
Step 2: Place a pin 1/4″ from the raw edge directly through the stitched seam on one piece at 90 degrees.
Step 3: Slide the tip of the pin through to the right side of the second piece and find the corresponding seam 1/4″ from raw edge. Push the pin through keeping it straight. This pin is called the setting pin.
![]() |
Pin is set at 90 degrees to the seam at the 1/4″ mark. |
Step 4: Place a pin on either side of the setting pin, using a small bite for both and the tips just on the stitch line. Remove the setting pin.
![]() |
You can also try with one pin set very close to the setting pin. |
Step 5: To preserve the points of the intersecting HST’s, sew 1 thread beyond the point. This will compensate for the fold of the fabric.
Shhh. Don't tell the others. This is my favorite one in the tour so far. I know it's because of my color preferences. Pretty!
Thank you Jane! It was an honor to be asked to participate! 🙂
This is so great! I LOVE the hints and Sherri's quilt is stunning.
Did you know that your pattern is the number 2 best seller on Craftsy?
Love, Frances
I've really enjoyed these posts. Sherri's version is lovely
Absolutely adore Sherri's version!